• Home
  • Adventurer 5M 3D Printer for Beginners 600mm/s Fast Printing Direct Drive (280C) Auto-Leveling 8.7"x8.7"x8.7" PEI Build Plate - Ideal for Home School & Makers

Adventurer 5M 3D Printer for Beginners 600mm/s Fast Printing Direct Drive (280C) Auto-Leveling 8.7"x8.7"x8.7" PEI Build Plate - Ideal for Home School & Makers

103.00
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description
          600mm/s Hyper-Speed Printing with Klipper Engine. Industry-leading 20 000mm/s Acceleration - Equipped with 32mm/s high-flow nozzle and 50W ceramic heater reaching 200C in 35s. Ideal for rapid prototyping and batch production reducing print time by 40-60% for PLA/PETG/ASA.
          Auto Bed Leveling. 0.01mm Precision Calibration - Features 25-point detecting and pressure-sensor compensation achieving perfect first-layer adhesion.
          Industrial-Grade CoreXY Frame with Anti-Vibration. Dual linear rails & aluminium frame reduces resonance by 63% compared to bed-slingers. 24/7 continuous printing capable with 0.1 mm dimensional accuracy - Perfect for engineering prototypes and functional parts.
          Smart Workshop Ecosystem. MagSwitch PEI plate (removal in 3s) + Nozzle X quick-change system (swap <15s). Built-in filament sensor & remote monitoring via App. Silent operation meets UK noise regulations for home use.
          Multi-Material Pro Configuration. 0.25-0.8mm nozzles for miniature models to architectural prints. Optional enclosure with your own printing plate offers a cost-effective upgrade to the similar AD5M Pro printing capability.
          Build Your Own Enclosed 3D Printer. Start with the barebones unit add our essential enclosure hardware and finish with your printed panels (designs supplied) for a dust-free temperature-controlled environment.

          • Robust CoreXY Structure: Industrial-grade stability for flawless prints at 600mm/s max speed and insane 20 000mm/s acceleration.
          • 3-Second Nozzle Swap: Change hotends faster than brewing coffee zero downtime maximum creativity.
          • Smart Auto-Leveling: Achieve perfect first layers with one-click calibration no more manual frustration!
          • Flexible PEI Plate: Effortless pop-off prints + magnetic convenience.
          • Power Loss Recovery: Never lose a print again resume work seamlessly after outages.

        • Reduces drafts & noise
        • Better print consistency

          • Yes. It is Plug and Play 3D Printer. Takes only 10 minutes to unboxing and preparing for printing. Auto Leveling design is friendly to beginners.

        • How about daily maintenance?

          Model Removal:

          Take the PEI plate out and bent slightly to get the model.

          Put the PEI plate back to magnetic attract to the bed plate.

          Nozzle Removal:

          Nozzle can be released in 3 seconds.

        • What kind of 1.75mm filament is compatible with AD5M?

          PLA PETG TPU prints well on AD5M. If you DIYed the enclosure for AD5M you can also print with ASA ABS PLA-CF and PETG-CF.

          Compatible with most filament spools.

        • Are there any instructions we can refer to?

          We uploaded the User Manual and Quick Start Guide in the page(Product guides and documents section) please message us if you need any help.

        • Which software is recommend to use?

          Orca-. You can refer to the Software introduction &installation section in User Guide which can be downloaded in this page.

          • We pack a Quick Start Guide inside the package and you can find User Manual in the USB Disk. You can also learn from the videos we uploaded on YTB.

          AD5M: Hyper-Speed 600mm/s CoreXY Dominator!

          adventurer 5m features introduction

          Unlimited ldeation

          Full-auto One-click Leveling

          Rapid yet stable

          Snap-on Design 3 seconds Replacement

          AD5M 3D Printer Enclosure Kit

          Is Adventurer 5M 3D Printer a good choice for beginners?

          How about daily maintenance?

          What kind of 1.75mm filament is compatible with AD5M?

          Are there any instructions we can refer to?

          Which software is recommend to use?

          Where I can find the intructions?